There are all kinds of quick fixes for a damaged cord. And some of them are great when you need your saw working again on the job site, but a damaged cord is always a safety risk and should be replaced as soon as possible. This article will help get you through a cord repair on your Makita Circular Saws.
The Makita 5903RK 9 Inch / 235 mm Circular Saw comes complete with a carbide-tipped saw blade, rip fence (guide rule), a hex wrench and carry case. Makita Circular Saws is a redesigned version of the predecessor Model 5900BR.
A broken cord has all sorts of quick fixes. And some of them are perfect when you need your saw to work on the worksite again, but a broken cord is always a danger to health and should be replaced as soon as possible.
Remove the side cover from the handle:
To gain access to the switch and power cord, remove the five screws which protect the handle side cover.
Taking off cable wires:
Pull the switch off the assembly handle. Remember then where each power cord connects to it so you can connect it later.
Inspect the relief from pressure:
Take a moment to check for splitting or other damage to the pressure relief. If it seems tired, the pain relief should be replaced too.
Fix the existing cord:
Thread the cord wires through your relief from strain using the substitute if necessary. Then put the pressure relief on the base of the handle back into its holder.
Mount a clamping cord:
Protect the relief of the tension and the cable by pushing the cord clamp with the two screws down.
Place the cable wires back on:
Connect the wires of the cord to the switch just like before. Nestle the switch back into the handle, then route the cord wires into the saw’s handle so they won’t get pinched when the cover is on.
Keep the cover on the handle:
Now just remove and secure the cover of the handle to finalize your repair
Toptopdeal provides you Makita 5903RK Circular Saw. Now you have saved money compared to a repair shop and, due to a poor cable, have reduced the risk of electrocution at the job site. This quick-fix can be done when you find damage to the thread.
Thanks for reading the article. We hope this article is helpful for you.