Makita HR005GD201 40V Max Li-ion XGT Brushless Rotary Demolition Hammer, 40 V 40mm maximum TCT bit, 105mm maximum core bit Electric brake and torque limiter Soft start, variable speed controlled by dial and constant speed control Depth gauge for increased drilling consistency Soft no load function 2 operating modes for rotary hammer and hammer only Anti-vibration technology (AVT) Makita is the leading manufacturer of professional power tools on the market. Introducing XGT, a new 40V standalone system; with a new charging adapter to allow the new 40V XGT platform to use the DC40RA charger to charge both LXT slide type battery and the new XGT battery, in as little as 28 minutes. The XGT range of tools and batteries have a built-in program that provides digital communication between the battery and the tool, allowing for the battery not only to talk with the tool but also for the tool to talk to the battery. The HR005GD201 is a cordless Rotary Demolition Hammer, adapted for SDS-Max bits, powered by 40V Max XGT battery, to supply energy to the powerful 40V brushless motor, with soft start for smooth start-ups, variable speed controlled by dial to enable the operator to match the speed to the application and constant speed control to automatically apply additional power to the motor to maintain constant speed under load, to deliver up to 500 rpm, 2,900 bpm and 8.0 J impact energy for high performance drilling. The HR005GD201 is equipped with 2 operating modes for rotary hammer and hammer only, electric brake for increased operator safety, LED job light to illuminate the work area, depth gauge for increased drilling consistency and torque limiter to stop the bit rotation if the bit jams or hits against a reinforcement for increased operator safety. The HR005GD201 features “soft no load” function to automatically reduce the motor speed during idling to suppress the vibration of the machine body, anti-vibration technology; an active dynamic vibration absorber which ensures operation with extremely low vibration, active feedback sensing technology (AFT) to shut down the tool to protect the operator is the rotation speed suddenly slows down and auto-start wireless system (AWS) to connect the HR005GD201 to a compatible dust extractor with Bluetooth. The dust extraction system automatically runs whilst the switch is on. The HR005GD201 is further equipped with battery protection circuit designed to protect the battery from damages due to overheating, over-discharge and overload current. 1 year manufacturer warranty with a further 2 years when registered within 30 days of purchase. This guarantee does not apply where non-genuine or recommended parts or accessories are fitted to the tool. The use of non-genuine or compatible batteries and chargers with Makita tools will invalidate the Makita guarantee for our tools.