TOP 3 CORDLESS MAKITA SDS PLUS HAMMER DRILLS

Makita SDS-MAX Rotary Drilling Body Only on carrying cases LXT Brushless SDS-Max Only

The Makita DHR400ZKU is a rotary SDS-Max cordless hammer. The Brushless and Cordless SDS-MAX Rotary Demolition Hammer DHR400ZKU LXT. A rotary hammer is a versatile instrument that can perform heavy-duty tasks such as drilling and chiseling hard materials. It’s similar to a hammer drill because it also pounds the drill bit in and out as it’s spinning.

SPECIFICATION :       

  • Voltage: 36v (2 x 18v)
  • No Load Speed: 250 – 500 rpm
  • Blows per Minute: 1,450 – 2,900 bpm
  • Shank: SDS-MAX
  • Max TCT Bit: 40 mm

Brushless SDS + Rotary Hammer Drill Body Makita DHR281ZJ 36V With Fast Change Chuck In Case

This Makita DHR281ZJ Twin 18v SDS+ Rotary Hammer has XPT – Xtreme Protect technology which, even under harsh conditions, provides optimum protection against dust and water splashes. It also comes with a rapid-change SDS-PLUS chuck that allows you to use more drill bits for your particular application

SPECIFICATION :  

  • Battery Compatibility: 18v Lithium-Ion LXT
  • Voltage: 36v (18vx2)
  • Impact Energy: 2.8 J

Makita DHR264ZJ 36V SDS+ Drill Body for Rotary Hammer Fast Change Chuck With Case

Makita is one of the leading specialist power tool manufacturers on the market. The Makita DHR264ZJ is a 26mm cordless SDS plus rotary hammer drill based on BHR262T models, but powered by 2 x 18V batteries, giving a 36-volt computer the equivalent capacity.

The Makita DHR264Z is a 26mm SDS+ cordless plus rotary hammer drill based on the BHR262T model but powered by 2x 18v batteries that give a 36v machine the equivalent power. A fast change chuck is also included to allow standard straight shank drill bits to be used.

 SPECIFICATION :

  • Voltage: 36v (2x 18v)
  • Battery capacity: Up to 5Ah
  • Max. in steel: 13mm
  • No-load speed: 0-1,200 rpm

SDS Sizes and Ratings

  • SDS Top is a rare configuration. In the 2kg to 5kg range, SDS Top is rated for hammers.
  • A typical industrial fitting is SDS Max. Instead of the two rolling balls employed in SDS Plus and SDS Top, it uses an 18mm shank with three open grooves.

We hope that ours is one of the most valuable reviews you are reading of SDS hammer drills and that at least our purchasing tips can help you get the best possible purchase for your hard-earned dollars. If you want to buy the best SDS hammer drills, please visit our website for Toptopdeal.

For more information please visit our website:

www.toptopdeal.co.uk

Also email us at:-                

info@toptopdeal.co.uk

Leave a Reply

Your email address will not be published. Required fields are marked *